See each feature in use.
What each feature reads, what it does with the values, and where its limits are. The instruments run on the same labelled sample data as the rest of the site.
Read what the car reports.
The same cable reaches the battery controller and other responding modules. Check a fault, watch a reading change, then save the session so you can compare it after the next visit.
Battery health
Read the battery controller's health and charge estimates alongside pack voltage, cell-group spread and temperatures. Hanterill compares related readings so a number that disagrees with the rest is easier to spot.
- Min
- 3.717 V
- Max
- 3.725 V
- Delta
- 8 mV
Full vehicle scan
Hanterill finds the modules fitted to the car over DoIP and reads their identity, hardware and software records. The CMA catalogue has 49 entries, including 40 that can report fault codes; a given car may have fewer.
Simulated session · fixed sample data, not a vehicle reading
Fault codes, by status
Hanterill reads DTCs with their status: active now, pending, stored or historical. The list opens on the codes that need attention. If the ECU saved a snapshot when the fault set, you get that too, with a built-in diff between scans.
- BECM P0A80-00
Replace hybrid/EV battery pack
Stored · Snapshot available
- CCM B1B25-13
Evaporator temperature sensor, circuit open
Active · Present at scan
- TCAM U3003-16
Battery voltage below threshold during telematics session
Pending · Seen once
- BECM P1AF0-71
Battery cell balancing performance
Historical · Cleared, retained
Live telemetry
Follow battery, motor and 12 V readings as they change. Save the chart when you need to compare it with a later test.
Simulated drive cycle · sample data, not a vehicle reading
Service procedures
Parking-brake service mode, 12 V battery adaptation, service reminder reset and climate calibration each require confirmation. Some actions may also be protected by the car's security level.
- Electric parking brakeService position
- 12 V batteryAdaptation reset
- Climate controlDamper calibration
- SunroofNormalisation
Ordinary checks read information from the car. An action that can change the car asks for confirmation first.
A scored health report you can hand to someone
The report brings battery condition, cell balance, faults and mileage checks together. It shows when missing readings limit the result.
- Pack degradationwithin band
- Cell balancespread widening
- Fault severity1 pending
- Odometer consistencyall ECUs agree
- Service intervaldue in 9 400 km
Rules v1.0.0 · each line cites its basis
Before and after, side by side
Sessions archive locally and compare inside the app: fault codes before and after a repair, cell potentials module by module, firmware before and after an update.
- active
- 3
- historical
- 4
- active
- 0
- historical
- 2